Xiaomi officially announced the Xiaomi 13T series at an event held in the German capital, Berlin. Xiaomi 13T and 13T Pro.
However, the difference is, the Xiaomi 13T and 13T Pro come with better cameras and IP68 certification for water and dust resistance.
Xiaomi 13T specifications
The Xiaomi 13T uses the Dimensity 8200-Ultra chipset with a 4nm process, which is basically the Dimensity 8200 platform developed by Mediatek with several adjustments.
This chipset is combined with 8 GB or 12 GB LPDDR5 RAM, and 256 GB UFS 3.1 storage.
The Xiaomi 13T has a 6.67-inch OLED display with a refresh rate of 144 Hz, Full HD+ resolution, and a peak brightness of more than 2,600 nits.
The main camera on the Xiaomi 13T has a 50 MP sensor with a type size of 1/1.28″ and individual pixels of 1.22 μm. This camera is equipped with OIS and an aperture of f/1.9.
The “portrait” telephoto camera has a 50 MP sensor resolution and f/1.9 aperture, but is equipped with a 50mm equivalent lens. The third camera is a 12 MP ultrawide camera with a 15mm equivalent lens and f/2.2 aperture.
The 5,000 mAh battery supports 67W wired charging, which is a step down from the 120W rate on the Xiaomi 12T. It promises to charge from 0 to 100% in just 42 minutes.
Xiaomi 13T Pro specifications
The Xiaomi 13T Pro has the same 6.67-inch OLED panel and 144 Hz refresh rate as the standard version, but uses a more powerful chipset, namely the Dimensity 9200+.
The triple 50 MP + 50 MP + 12 MP Leica main camera, 20 MP selfie camera and 5,000 mAh battery are the same features for both the new phones.
RAM on the Xiaomi 13T Pro is 12 GB or 16 GB, and here uses the faster LPDDR5X type, while storage is UFS 4.0 with three options – 256 GB, 512 GB, or 1 TB.
Another key difference is the charging speed – the Xiaomi 13T Pro supports HyperCharge 120W, which means it takes just 19 minutes to charge the battery from zero to 100%.
Both the Xiaomi 13T and 13T Pro are equipped with dual speakers and support Dolby Atmos Audio. Both run Android 13 with MIUI 14 interface on top.