Reporting from the GSMArena page, both in terms of design and specifications, the two phones are very similar. The only difference is the fingerprint sensor or fingerprint scanner which is only present on the Redmi A2+.
Specifications of Redmi A2 and Redmi A2 Plus
Redmi A2 and Redmi A2+ both have a length of 164.9 mm, a width of 76.8 mm, a thickness of 9.1 mm and a weight of 192 g.
Display Panels
For the screen sector, Redmi A2 and Redmi A2+ both use an IPS LCD type screen measuring 6.52 inches with a resolution of 720 x 1600 pixels. The screen has a brightness level of up to 400 nits and a pixel density of 269 ppi.
Performance
Turning to the hardware section, Redmi A2 and Redmi A2+ are powered by the Mediatek Helio G36 chipset (12 nm), Octa-core CPU (4×2.2 GHz Cortex-A53 & 4×1.7 GHz Cortex-A53) and GPU PowerVR GE8320. Meanwhile, for the software, Redmi A2 and Redmi A2+ run the Android 12 (Go edition) operating system, with the MIUI interface.
Memory Capacity
Redmi A2 and Redmi A2+ both come in two RAM variants, namely 2GB and 3GB, with an internal storage capacity of 32GB.
Camera Resolution
For cameras, the two Redmi phones come with two rear cameras, namely 8 MP (wide) and 0.08 MP (depth), as well as a front camera with a resolution of 5 MP.
Feature
To support their performance, these two phones are equipped with a number of features, namely a loudspeaker, 3.5mm jack, Wi-Fi 802.11 a/b/g/n, Bluetooth 5.0, GPS, FM radio, microUSB 2.0, and a 5000mAh Li-Po battery that supports charging. 10W power.
User Manual PDF Download