Review Xiaomi Redmi Note 10 Pro Max –Redmi Note 10 Pro and Redmi Note 10 Pro Max have the same specifications, except for the rear camera setup. The Pro comes with a 64MP main camera (Samsung GW3), while the Pro Max gets a 108MP main sensor (Samsung HM2). The cameras remaining in both are an 8MP ultra-wide unit, a 5MP telemacro, a 2MP depth sensor, and a 16MP selfie.
On the front, the duo flaunts a 6.67-inch FHD + (2400 x 1080 pixels) Super AMOLED display with a 120HZ refresh rate and a 2.96mm centered punch hole.
The panel has a peak brightness of 1200 nits, a contrast ratio of 45000000: 1, a 100% DCI-P3 color gamut, TÜV Rheinland certification for low blue light emission, supports HDR10, and is protected by Corning Gorilla Glass 5.
Interestingly, Xiaomi has chosen to place the fingerprint sensor on the power button instead of under the screen. Furthermore, the back of the phone has an unspecified (matte) frosted glass panel and a new camera array design. The device comes in three finishing colors, namely Vintage Bronze, Glacial Blue, and Dark Night.
Both handsets are powered by a Qualcomm Snapdragon 732G SoC paired with LPDDR4X RAM and UFS 2.2 storage. On the connectivity front.
both support dual-SIM, 4G, VoLTE, VoWiFi, dual-band WiFi, Bluetooth 5.0, and GNSS (GPS / AGPS, GLONASS, BeiDou). They also use all the essential sensors like accelerometer, proximity sensor, compass, 360 ° ambient light sensor and gyroscope.
Other features of this smartphone include a 3.5mm headphone jack, dual self-cleaning stereo speakers, dual microphones, Hi-Res Audio certification, a dedicated MicroSD card slot (up to 512GB).
This smartphone is also equipped with IP52 certification for splash resistance, USB Type-C port, 5.020mAh battery, 33W fast charging, and MIUI 12 based on Android 11. Finally, the Redmi Note 10 Pro and Redmi Note 10 Pro Max measure 164.5 x 76. , 15 x 8.1 mm in dimensions and 192g in weight.